HA5022 Datasheet | Intersil

atures wide bandwidth and high slew rate, and is optimized for video applications and gains between 1 and 10. It is a current feedback amplifier and thus yields less bandwidth degradation at high closed loop gains than voltage feedback amplifiers. The low differential gain and phase, 0.1d B gain flatness, and ability to drive two back terminated 75Ω cables, make this amplifier ideal for demanding video applications. The HA5022 also Features a disable function that significantly reduces supply current while forcing the output to a true high impedance state. This functionality allows 2:1 video multiplexers to be implemented with a single IC. The current feedback design allows the user to take advantage of the amplifier’s bandwidth dependency on the feedback resistor. By reducing RF, the bandwidth can be increased to pensate for decreases at higher closed loop gains or heavy output loads. Features - Dual Version of HA-5020 - Individual Output Enable/Disable - Input Offset Voltage - - - - . . . . 800µV - Wide Unity Gain Bandwidth - - - . . 125MHz - Slew Rate - - - - - - . 475V/µs - Differential Gain - - - - - . . 0.03% - Differential Phase - - - - 0.03 Degrees - Supply Current (per Amplifier) - - - . 7.5m A - ESD Protection- - - - - . . . 4000V - Guaranteed Specifications at ±5V Supplies Applications - Video Multiplexers; Video Switching and...